I'm making another bridesmaid's dress! This time it is for me. Yep, I'm going to be a bridesmaid for my mother-in-law's wedding in February. It was so sweet of her to ask me to be her bridesmaid, and I am so excited to be a part of her special day. What's more, I've decided to make my own dress, my bolero, and the bolero for her too, to keep us both warm on the day.
I'm usually far too lazy for unwearable toiles, but when it comes to formal wear, I think it is often necessary. This is especially the case for this bridesmaid dress - despite all the questionable reviews that I have read about this pattern (and see my verdict below...), I decided to be brave and give it a go, as I particularly liked the horizontal and vertical pleats (what is it with me and pleats?), and the dipped neckline. But I was sure about one thing - I do not want to waste the beautiful crepe-backed satin (in 2 different purple tones) so a toile was absolutely necessary in this instance.
I used an acetate satin in a slightly sickly looking baby pink that I bought a while ago for this Jason Wu peplum dress, but unfortunately I was just dreaming and never actually made it... I wanted to use a satin material to see how it will drape.
The fit actually turned out to be spot on - I cut a 6, and it's quite a closely-fitted dress. The only real design change I made at this stage is that I omitted the gathered skirt - whilst I like gathers generally, I do not like them in formal wear as it adds too much bulk at the waistline (who wants that?!). Instead, I used the skirt pattern from one of my old favourites - Simplicity 4070 and it seems to fit fine.
Now the pattern - oh how I can see what all the reviewers are saying! There are a few issues that I have with Butterick on this one:
1) The pattern pieces are kind of confusing. This is because there is no mention about underlining on the envelope, or in the cutting layouts. But when you start reading the instructions, it says "one lining layer will be used as underlining". I would not usually use the lining fabric as underlining too - I am thinking about using silk organza as the underlining - it's stable and thin.
I used self lining for this toile (to use as much of this Marshmallow fabric as possible!), so I had to cut out a few pieces 6 times, which of course confused matter even more.
To help future attempts at this pattern made by other seamstresses and myself, I have summarised the pattern pieces in this little table below.
Layer
|
Bodice pattern pieces
|
Midriff pattern pieces
|
Fashion fabric
|
1 (pleats) fold, 2 (side
front) x2, 5 (bodice back)x2
|
6 (front), 7 (back)x2
|
Underlining
|
3 (bodice front) fold, 4
(side front) x2, 5 (bodice back)x2
|
8 (front), 9 (back) x2
|
Lining
|
3 (bodice front) fold, 4
(side front) x2, 5 (bodice back)x2
|
8 (front), 9 (back) x2
|
2) I also didin't like the lining layer - is it really necessary to have so many pieces of lining? More importantly, with the split of bodice and midriff, there is an ugly bulky seam around the empire line, and because of this, the pattern only calls for short boning which extends to this line. More likely than not, boning is inserted to provide more support for the whole bodice, and provide a better shape around the midriff. In my opinion, bodice boning should at least extend to the waistline.
So I have now redrafted the lining pieces into 3 different pieces only - the centre front (cut on fold), side front (cut x2) and bodice back. I am planning on using these for the real thing, and add boning to all the seams extending to the waistline, and also add boning in the middle (approx) of the bodice back pieces too.
3) I had issue with the midriff pieces. I was pretty sure that I did cut the front piece (6) on bias, but when the instructions asked me to stretch the top to meet the top edge of the corresponding underlining piece (8), the fabric simply refused to stretch that far! It was really quite frustrating. I had the same problem with the midriff back pieces also. It may just be the fabric that I am using, but I shall make sure that I cut my crepe-backed satin extra wide just in case!
Oh look at how the seams do NOT line up?!
Obviously I have not bothered to press all the pleats in place, but for my real version I am going to be really careful with the gathers in the midriff pieces - they will need to be more evenly distributed for a smoother transition between the pieces. Ahhhh, look at this:
So, my lovely readers, before I make a start on my real dress, I wanted to get your opinion/help on a few things:
1. What do you think of the skirt? Personally I feel that it is currently too plain, especially as compared to the fairly "busy" bodice. So I am considering a pleated skirt - what do you prefer? To give you a slightly better idea, my pleated bodice section is going to be in a very pale lilac, and the rest of the dress (and the bolero) in deep purple.
2. Do I really need to cut the midriff as 3 pieces - is there any chance that a one wide pleated belt may work (I will draft this in a slightly more scientific way than guessing/eyeballing it but I wanted to throw this one out there!)
3. Does anyone have any tips on how to insert an invisible zip neatly with a bulky back section? The midriff part is going to be quite bulky, with all the horizontal gathers/pleats. I haven't inserted a zip here (just pinned it at the back), but I would be interested in hearing any tips that you may have!
4. Do you think underlining crepe-backed satin with silk organza would work? Any other alternatives that you would recommend?
Please do feel free to let me know what you think - if you have a comment about any of the above, please say and I will really appreciate your help/opinion!